As a preservation carpenter and joiner my work regularly requires me to work work with a wide variety of cut nails. A lot of recent woodworking publications focus on cut nails appropriate for cabinetmaking and smaller projects, but that barely scratches the surface of what was still available if you know what you want and where to look.
From small projects requiring a few nails…
To larger jobs needing them in bulk…
You can still get cut nails, even galvanized steel cut nails from Tremont, the oldest remaining and most prolific cut nail maker that is still around.
Why do I want to use cut nails?
Cut nails offer several advantages over modern wire nails:
- The chisel shape of the end of a cut nail helps to severe fibers as it is driven into the wood as opposed to wire nails that compress the wood around it
- The wedge shaped profile and sharp edges that result from how the nail is made help the nail hold better when compared to wire nails
- The distinctive square head, or decorative wrought head can be quite pleasing to the eye on new and old projects
- Cut nails with the wrought head can be a cost effective alternative to blacksmith wrought nails for larger or less historic projects
- Cut clinch nails can be clinched (bent over onto itself) which makes them a very effective fastener much like a large staple
- For preservation or reproduction work it is important to get the small details right — including use of the correct period appropriate fasteners
All that sounds well and good, but is it worth the extra time and expense to track down these sometimes hard to find nails?
I’d say it’s hard to argue with good results, so let’s take a look at some common uses for cut nails. From simple traditional boxes and drawers…
To high style door pediments and architectural details..
To clinched nails in a reproduction door on an historic home…
To siding and trim details…
The cut nails add to the visual authenticity and given their superior holding abilities will also increase the longevity of the work.
Tips on working with cut nails:
- Make sure the chisel end of the cut nail is set in across the grain thus severing it and not acting like a wedge
- Start off slow with a couple of light taps before driving the nail home with harder hammer blows
- If working near the end of a floor board or using a large spike consider pre-drilling a whole that is slightly smaller than the nail to prevent splitting
- If using the nails on an exterior application consider buying galvanized cut nails. If your local supplier does not offer that, you can send the nails out to have them hot dipped for a reasonable price. This will help the nails survive the elements and require less maintenance.
Gallery of the 20+ Cut Nail Types still available (If you are viewing this in email, you’ll need to click over to the blog to see this gallery properly displayed):
Where can I find these cut nails?
- If I need a small number of cut nails I usually order from Tools For Working Wood as they sell 1/8lb bags which are secured shut with another cut nail (Labeled as Brooklyn Tool and Craft I believe they are repackaged Tremont nails)
- If I need a large number of cut nails I usually order direct from Tremont Nail (A company in MA with over 190 years of cut nail making experience)They offer, 1lb, 5lb, 50lb and custom larger size (think nail casks) orders
- The Tremont Nail wood board with sample nails is available for purchase from Tremont — it’s a great addition to any shop and allow folks to examine each of the above described nail types in person. I have one in my shop and have found it to be a nice visual aid in my teaching.
I hope to see more folks using cut nails on their projects.
-Bill
Rainford Restorations 